P.O. Box 2402 Rivonia 2128
36 – 38 Homestead Road
Corner 12th Avenue
Rivonia
South Africa
Phone: +27 011 233 4000
Fax: +27 011 233 4006
e-mail: zacomms@za.unisys.com
Unisys Customer Services
The Gatehouse
Units 104 and 105
Century Way
Century City
Cape Town
80001
South Africa
Phone: 2711 23340000
Fax: 2721 529 8500
In the course of conducting our information services and technology business worldwide, Unisys collects and processes personally identifiable information of our clients, shareholders, employees, suppliers, business partners, website visitors and other persons (Personal Data). Maintaining the integrity and confidentiality of Personal Data and handling it correctly is central to the way we conduct our business activities. This policy describes how we handle Personal Data.
Personal Data is information that can be used directly or indirectly to identify a living individual. Personal Data may include sensitive categories of information, such as information that reveals racial or ethnic origin, political opinions, religious beliefs, trade union membership, health or sexual orientation (Sensitive Personal Data).
This policy applies to Unisys Corporation and its subsidiaries, and is effective as of October 1, 2002. All employees will be required to abide by this policy.
This policy is designed to protect Personal Data under applicable law as it currently exists. However, Unisys realizes that this policy cannot address every potential issue and circumstance. Therefore, we acknowledge that this policy is subject in all respects to applicable local legal and regulatory requirements and existing agreements and confirm that we will comply with such requirements and existing agreements.
We will observe the privacy principles described below of Notice, Choice/Fair Processing, Access, Security/Integrity, Onward Transfer and Enforcement/Compliance in processing Personal Data.
When we collect and process Personal Data about individuals, we will make certain information available to those individuals on a reasonable and timely basis. This information will include what Personal Data is being collected, who is collecting it, how and for what purposes it is being collected, how it is being used and to whom it will be disclosed.
We will process Personal Data only with consent or when such processing is permitted by applicable law. If we need to process Sensitive Personal Data, we will obtain explicit consent for such processing, unless such processing is permitted by applicable law.
We will not process Personal Data in a manner incompatible with the purposes for which it was originally collected unless later authorized by the affected individuals or allowed by law; we will take reasonable steps to ensure that such data is accurate, adequate, relevant and not excessive in relation to such purposes; and we will not keep such data longer than is necessary for such purposes.
We will enable individuals to choose whether their Personal Data can be disclosed to a third party for direct marketing purposes.
We will allow individuals reasonable access to their Personal Data to verify, correct or delete their data, where inaccurate. We will also provide a means for individuals to exercise all other legal rights that they may have in relation to their Personal Data.
Personal Data will be accessible and processed only by (i) Unisys employees, suppliers, business partners and others who require access for the performance of their obligations to Unisys; (ii) any person granted access by the individual to whom Personal Data pertains; and (iii) those otherwise authorized by law or court order.
We will take reasonable security procedures through appropriate technical and organizational measures to protect against unauthorized or unlawful access or processing, disclosure, alteration, destruction or accidental loss of Personal Data.
We will utilize reasonable means to keep Personal Data accurate, complete and current in order to protect the quality and integrity of Personal Data, however, we rely on individuals to provide all relevant information and to advise us of any changes to their Personal Data to ensure that it remains accurate, complete and current.
When we transfer Personal Data within Unisys or to third parties (including our suppliers and business partners), we will observe the privacy principles of Notice and Choice (described above), and we will require all the recipients of such data to provide at least the same level of protection for such data as specified by the standards stated in this policy.
We will follow internal processes for handling complaints regarding our management of Personal Data.
We will demonstrate our compliance with this policy by:
In addition to all other Personal Data handled by Unisys, this policy applies to Personal Data collected through Unisys websites.
As a convenience to our website visitors, we sometimes provide links to other websites. These linked sites are not under the control of Unisys, and as such, we are not responsible for their content.
Changes in legislation and/or our business activities may require that this policy be updated from time to time.
If you have any questions or comments regarding Unisys privacy policy or practices, please contact us via email: UnisysPrivacyOffice@unisys.com
Copyright © 2011 Unisys. All rights reserved. www.unisys.com
ATTENTION: PLEASE READ THESE TERMS OF USE ("TERMS") BEFORE USING THIS WEBSITE ("SITE"). IF YOU DO NOT ACCEPT THESE TERMS, PLEASE DO NOT USE THIS SITE.
UNISYS CORPORATION ("UNISYS") RESERVES THE RIGHT TO CHANGE THESE TERMS AT ANY TIME, WITHOUT NOTICE TO YOU. ACCORDINGLY, YOU ARE ADVISED TO VISIT THIS PAGE TO REVIEW THE MOST CURRENT VERSION.
The contents of this Site are the property of Unisys or are licensed to Unisys by a third party. You may display, copy, distribute and download the materials on this Site provided you do so only for personal, non-commercial purposes, that you do not modify the material and that you retain all copyright and other proprietary notices contained therein.
Except as stated above, or unless otherwise expressly stated, no license is granted herein expressly, impliedly, by estoppel or otherwise under any patent, trade secret, trademark, copyright or other intellectual property of Unisys or any third party.
THE MATERIALS PUBLISHED OR PROVIDED ON THIS SITE ARE FURNISHED TO YOU "AS IS" AND WITHOUT WARRANTIES OF ANY KIND, WHETHER EXPRESS OR IMPLIED. TO THE FULLEST EXTENT PERMISSIBLE UNDER APPLICABLE LAW, UNISYS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, TITLE, OR NON-INFRINGEMENT. UNISYS DOES NOT REPRESENT OR WARRANT THAT THE SITE WILL BE UNINTERRUPTED OR ERROR-FREE, THAT DEFECTS WILL BE CORRECTED, OR THAT THE SITE, ITS CONTENT OR THE SERVER(S) THAT SUPPORT SITE ARE FREE OF VIRUSES OR OTHER HARMFUL COMPONENTS. UNISYS DOES NOT MAKE ANY WARRANTIES OR REPRESENTATIONS REGARDING THE USE OF THE CONTENT OF THE SITE IN TERMS OF ITS COMPLETENESS, CORRECTNESS, ACCURACY, ADEQUACY, USEFULNESS, TIMELINESS, RELIABILITY OR OTHERWISE.
SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF WARRANTIES, SO THE FOREGOING EXCLUSIONS MAY NOT BE APPLICABLE TO YOU.
IN NO EVENT SHALL UNISYS OR ANY OTHER PARTY INVOLVED IN PRODUCING OR DELIVERING THIS SITE BE LIABLE TO ANY PARTY FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, PUNITIIVE, EXEMPLARY OR CONSEQUENTIAL DAMAGES OF ANY TYPE WHATSOEVER EVEN IF IT HAS BEEN PREVIOUSLY ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, WHETHER IN AN ACTION UNDER CONTRACT, TORT, NEGLIGENCE, OR ANY OTHER THEORY, RELATED TO OR ARISING FROM THIS SITE OR FROM ANY USE OF THIS SITE, OR FROM ANY SITE OR RESOURCES LINKED TO, REFERENCED BY, OR ACCESSED THROUGH THIS SITE, INCLUDING, WITHOUT LIMITATION, ANY LOST PROFITS, BUSINESS INTERRUPTION, LOST SAVINGS OR LOSS OF PROGRAMS OR OTHER DATA, EVEN IF UNISYS IS EXPRESSLY ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Statements prepared by Unisys and made on this Site that are not historical facts are forward-looking statements as defined in the Private Securities Litigation Reform Act of 1995. These forward-looking statements are subject to various risks and uncertainties that could cause actual results to differ materially from expectation. These factors are discussed more fully in the company's Securities and Exchange Commission reports, including its most recently filed annual report on Form 10-K and subsequently filed quarterly reports on Form 10-Q. All such forward-looking statements should be considered in light of these factors.
As a convenience, this Site may provide links to third party sites. Unisys does not review or control, and is thus not responsible for, these third party sites or their content. Such links should not be assumed to constitute an endorsement or recommendation by Unisys. By clicking on any of these links, you are leaving the Unisys Site and accessing these other sites at your own risk.
You may create links to this Site from other sites, provided that, without separate written permission, you do not use the Unisys logo to create the link and do not present the link to this Site in a manner that it is associated with advertising or appears to be an endorsement by Unisys of any organization, product or services. You agree that the link will not appear on a website that a reasonable person may consider obscene, defamatory, harassing, grossly offensive, or malicious.
Unisys and the Unisys logo are trademarks of Unisys Corporation. A list of other Unisys marks is available here. All other marks on this Site are the property of their respective owners.
Unless otherwise stated, any communication provided by you to Unisys in connection with this Site will be received only on a non-confidential basis. There shall be no obligation on the part of Unisys with respect to use or disclosure of any information in such communication. Unisys Corporation shall have the unrestricted right to copy, use and distribute any information you communicate to it, including but not limited to any ideas, concepts, know-how, techniques, software, documentation, diagrams, schematics or blueprints. Additionally, all such information may be used by Unisys in any manner for any purpose including, but not limited to, developing and manufacturing products and providing services.
Unisys may provide chat room, bulletin boards, blogs or other user forums ("Forums") that allow third parties to post content and comments. Unisys has the right, but not the obligation, to review or monitor third postings ("Submissions") and to remove Submissions that contains material Unisys deems offensive, abusive, defamatory, obscene or otherwise unacceptable. However, Unisys shall not be liable for claims arising from those Submissions whether arising under the laws of copyright, libel, privacy, obscenity or otherwise.
You agree not to transmit or post on these Forums any Submissions that (i) are defamatory, threatening, obscene or harassing (ii) contain a virus, worm, Trojan horse or any other harmful component (iii) incorporate copyrighted or other proprietary material of any third party without that party's permission or (iv) otherwise violate any applicable laws.
These Terms shall be governed in all respects by the laws of the Commonwealth of Pennsylvania, without regard to its conflict of laws provisions.
You may not access, download, use, or export information (including software, products or services) contained on this Site in violation of any applicable laws or regulations including, without limitation, U.S. export laws.
For information on how Unisys handles your personal information, see our Privacy Policy.
You agree to indemnify, defend and hold harmless, Unisys, its subsidiaries, affiliates, joint venturers, business partners, licensors, employees, agents and third party information providers from and against all losses, expenses, damages and costs, including attorneys fees, resulting from any violation of these Terms (including negligent or wrongful conduct) by you or your use and access to this Site.
The failure by Unisys to insist upon or enforce strict performance of any provision of these Terms shall not be construed as a waiver of any provision or right.
Unisys will process and investigate notifications of alleged infringement and will take appropriate action under the Digital Millennium Copyright Act, Title 17, United States Code, Section 512 ("DMCA") and other applicable intellectual property laws. Notifications of claimed copyright infringement should meet the requirements set forth in Section 512(c)(3)(A) of the DMCA and should be sent to the Unisys Designated Agent(s):
Stephanie Thier and Robert Marley
Unisys Corporation
801 Lakeview Drive
Suite 100
Blue Bell, PA 19422
Tel (215) 986-2955
Fax (215) 986-3090
If you have any questions or comments regarding Unisys privacy policy or practices, please contact us via email: UnisysPrivacyOffice@unisys.com
ATTENTION: PLEASE READ THESE TERMS OF USE ("TERMS") BEFORE USING THIS WEBSITE ("SITE"). IF YOU DO NOT ACCEPT THESE TERMS, PLEASE DO NOT USE THIS SITE.
UNISYS CORPORATION ("UNISYS") RESERVES THE RIGHT TO CHANGE THESE TERMS AT ANY TIME, WITHOUT NOTICE TO YOU. ACCORDINGLY, YOU ARE ADVISED TO VISIT THIS PAGE TO REVIEW THE MOST CURRENT VERSION.
The contents of this Site are the property of Unisys or are licensed to Unisys by a third party. You may display, copy, distribute and download the materials on this Site provided you do so only for personal, non-commercial purposes, that you do not modify the material and that you retain all copyright and other proprietary notices contained therein.
Except as stated above, or unless otherwise expressly stated, no license is granted herein expressly, impliedly, by estoppel or otherwise under any patent, trade secret, trademark, copyright or other intellectual property of Unisys or any third party.
THE MATERIALS PUBLISHED OR PROVIDED ON THIS SITE ARE FURNISHED TO YOU "AS IS" AND WITHOUT WARRANTIES OF ANY KIND, WHETHER EXPRESS OR IMPLIED. TO THE FULLEST EXTENT PERMISSIBLE UNDER APPLICABLE LAW, UNISYS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, TITLE, OR NON-INFRINGEMENT. UNISYS DOES NOT REPRESENT OR WARRANT THAT THE SITE WILL BE UNINTERRUPTED OR ERROR-FREE, THAT DEFECTS WILL BE CORRECTED, OR THAT THE SITE, ITS CONTENT OR THE SERVER(S) THAT SUPPORT SITE ARE FREE OF VIRUSES OR OTHER HARMFUL COMPONENTS. UNISYS DOES NOT MAKE ANY WARRANTIES OR REPRESENTATIONS REGARDING THE USE OF THE CONTENT OF THE SITE IN TERMS OF ITS COMPLETENESS, CORRECTNESS, ACCURACY, ADEQUACY, USEFULNESS, TIMELINESS, RELIABILITY OR OTHERWISE.
SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF WARRANTIES, SO THE FOREGOING EXCLUSIONS MAY NOT BE APPLICABLE TO YOU.
IN NO EVENT SHALL UNISYS OR ANY OTHER PARTY INVOLVED IN PRODUCING OR DELIVERING THIS SITE BE LIABLE TO ANY PARTY FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, PUNITIIVE, EXEMPLARY OR CONSEQUENTIAL DAMAGES OF ANY TYPE WHATSOEVER EVEN IF IT HAS BEEN PREVIOUSLY ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, WHETHER IN AN ACTION UNDER CONTRACT, TORT, NEGLIGENCE, OR ANY OTHER THEORY, RELATED TO OR ARISING FROM THIS SITE OR FROM ANY USE OF THIS SITE, OR FROM ANY SITE OR RESOURCES LINKED TO, REFERENCED BY, OR ACCESSED THROUGH THIS SITE, INCLUDING, WITHOUT LIMITATION, ANY LOST PROFITS, BUSINESS INTERRUPTION, LOST SAVINGS OR LOSS OF PROGRAMS OR OTHER DATA, EVEN IF UNISYS IS EXPRESSLY ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Statements prepared by Unisys and made on this Site that are not historical facts are forward-looking statements as defined in the Private Securities Litigation Reform Act of 1995. These forward-looking statements are subject to various risks and uncertainties that could cause actual results to differ materially from expectation. These factors are discussed more fully in the company's Securities and Exchange Commission reports, including its most recently filed annual report on Form 10-K and subsequently filed quarterly reports on Form 10-Q. All such forward-looking statements should be considered in light of these factors.
As a convenience, this Site may provide links to third party sites. Unisys does not review or control, and is thus not responsible for, these third party sites or their content. Such links should not be assumed to constitute an endorsement or recommendation by Unisys. By clicking on any of these links, you are leaving the Unisys Site and accessing these other sites at your own risk.
You may create links to this Site from other sites, provided that, without separate written permission, you do not use the Unisys logo to create the link and do not present the link to this Site in a manner that it is associated with advertising or appears to be an endorsement by Unisys of any organization, product or services. You agree that the link will not appear on a website that a reasonable person may consider obscene, defamatory, harassing, grossly offensive, or malicious.
Unisys and the Unisys logo are trademarks of Unisys Corporation. A list of other Unisys marks is available here. All other marks on this Site are the property of their respective owners.
Unless otherwise stated, any communication provided by you to Unisys in connection with this Site will be received only on a non-confidential basis. There shall be no obligation on the part of Unisys with respect to use or disclosure of any information in such communication. Unisys Corporation shall have the unrestricted right to copy, use and distribute any information you communicate to it, including but not limited to any ideas, concepts, know-how, techniques, software, documentation, diagrams, schematics or blueprints. Additionally, all such information may be used by Unisys in any manner for any purpose including, but not limited to, developing and manufacturing products and providing services.
Unisys may provide chat room, bulletin boards, blogs or other user forums ("Forums") that allow third parties to post content and comments. Unisys has the right, but not the obligation, to review or monitor third postings ("Submissions") and to remove Submissions that contains material Unisys deems offensive, abusive, defamatory, obscene or otherwise unacceptable. However, Unisys shall not be liable for claims arising from those Submissions whether arising under the laws of copyright, libel, privacy, obscenity or otherwise.
You agree not to transmit or post on these Forums any Submissions that (i) are defamatory, threatening, obscene or harassing (ii) contain a virus, worm, Trojan horse or any other harmful component (iii) incorporate copyrighted or other proprietary material of any third party without that party's permission or (iv) otherwise violate any applicable laws.
These Terms shall be governed in all respects by the laws of the Commonwealth of Pennsylvania, without regard to its conflict of laws provisions.
You may not access, download, use, or export information (including software, products or services) contained on this Site in violation of any applicable laws or regulations including, without limitation, U.S. export laws.
For information on how Unisys handles your personal information, see our Privacy Policy.
You agree to indemnify, defend and hold harmless, Unisys, its subsidiaries, affiliates, joint venturers, business partners, licensors, employees, agents and third party information providers from and against all losses, expenses, damages and costs, including attorneys fees, resulting from any violation of these Terms (including negligent or wrongful conduct) by you or your use and access to this Site.
The failure by Unisys to insist upon or enforce strict performance of any provision of these Terms shall not be construed as a waiver of any provision or right.
Unisys will process and investigate notifications of alleged infringement and will take appropriate action under the Digital Millennium Copyright Act, Title 17, United States Code, Section 512 ("DMCA") and other applicable intellectual property laws. Notifications of claimed copyright infringement should meet the requirements set forth in Section 512(c)(3)(A) of the DMCA and should be sent to the Unisys Designated Agent(s):
Stephanie Thier and Robert Marley
Unisys Corporation
801 Lakeview Drive
Suite 100
Blue Bell, PA 19422
Tel (215) 986-2955
Fax (215) 986-3090
If you have any questions or comments regarding Unisys privacy policy or practices, please contact us via email: UnisysPrivacyOffice@unisys.com
Engage With Us
